Pic

Updated at 2021-04-20 14:34:49 UTC

How do I Reset my HP Printer Network Settings

HP printers are awesome, and they can prove to be a good tool when it comes to printing. But they might malfunction after a while, and you might want to reset them to make sure they don’t malfunction again.


It might not be the best solution you can try on your printer, but it certainly is the required one. And it is the best solution when the HP printer is showing offline. Resetting the printer to Factory defaults is usually the last resort when you are troubleshooting an issue. It often resolves all kinds of problems, but you have to set your printer on all your devices again.


Resetting the HP printer


When you reset the HP printer, it won’t reset page count, tray size, or language. Here are the steps:


First, turn off the printer and disconnect the power cables for 30 seconds and then plug it back again.
Then, you need to turn on the power button, but you need to hold the button for 10 to 20 seconds.
Now, you can release the button, and the printer will blink attention and ready button while it restores the default settings.

How to Reset HP Printer


Methods To Reset HP Officejet 3830 Printer


If you are facing any kind of printer error or your printer is not working, then the two possible reasons may be certain. The printer doesn’t print anything and in the middle of the printing process, print job stops to function. Follow the below instructions to fix the issue:


Check The Paper Is Jammed


Before starting with the resetting process, you need to first check out the paper that is printing and make sure that paper is not jammed. Check the paths through which documents pass for print. If any paper is stuck into the tray, remove that jammed paper properly and then attempt a test print.


Check Ink Cartridges


The next step you are required to do is to check the ink cartridges. To check it, open the access door of that printer and then eject both colored and black & white cartridges. Make sure the cartridges have ink in them. In case, it is empty, then fill the ink into the container and then try to print again.


Reset My HP Officejet 3830 Printer


If clearing out the jammed paper from the tray and install the ink cartridges don’t assist Printer not to work problem, then you can take the last step to sort out the issue. Resetting HP Officejet 3830 Printer is the only answer of your printing problem related query. Following are the step-by-step procedure for printer reset. So, have a glance at once:


First, you have to turn-on your printer if it is off
Now, before you start performing anything, you need to wait until the Printer is idle and silent
As the printer is prepared for printing, disconnect the energy cord from the primary electrical supply
Now, you have to reconnect the power cord to the wall outlet
If the printer does not automatically turn-on when you need to turn that ON manually
Wait a couple of moment to be prepared for print job again
Give A Ring On Helpline Number For Immediate Solution
If you are unable to fix HP Printer Offline issue or any common printer problems with resetting process, then don’t panic! We are there 24/7 to help you out. The thing you should do is to put a call on toll-free number and get united with talented as well as experienced tech-geeks for hands-free solution.

Other Post

How to jailbreak amazon firestick

Canon Pixma MG3022 Setup

Slow Installation of Microsoft office 2010

How to Reactivate AOL Account



Comments